一本加勒比HEZYO高清


Contact Juhe Collection and gathering Online Message Website map Welcome to Dongguan Heju Precision Electronic Technology Co., Ltd

National Service Hotline: 135-2852-2558

 Metal stamping parts, stamping processing, stamping plant, precision stamping

30 years of experience in electronic hardware shrapnel customization Specializing in high difficulty, high precision, special-shaped non-standard shrapnel processing plant

What are the types of drawing process?

 Back to list Source: Heju hardware Browse: - Release date: June 25, 2019【 large in Small
 
It has high productivity, high material utilization, high dimensional accuracy and low surface roughness. It can make deep drawing parts as small as a few millimeters and as large as several meters, and thin-walled and complex parts that are difficult to be formed by other processing methods. What are the types of stretching process? The following small series of Heju precision hardware factory will explain to you Drawing processing There are six types of processes
(1) Panel stretching process
The panel is a sheet metal stamping part with complex surface shape. In the drawing process, the blank deformation is complex, and its forming property is not simple drawing forming, but composite forming of drawing and bulging at the same time.
(2) Curved surface forming technology
The outer flange part of the metal plate blank is reduced and the inner flange part is elongated by curved surface stretch forming, which becomes a hollow stamping method with curved surface shape of non straight wall and non flat bottom.
(3) Edge drawing process
The flange part of the drawing product in the previous process is angular re formed Drawing processing This processing requires good plasticity of the material.
(4) Deep drawing process
The drawing workpiece beyond the limit of drawing processing needs more than two times of stretching. The products that have been drawn in the depth direction of the front station are re stretched in the depth direction.
(5) Thinning drawing process
Different from normal drawing, thinning drawing is mainly to change the thickness of the cylinder wall in the drawing process. The gap between punch and die is less than the thickness of blank, and the straight wall of blank is under large uniform compressive stress when passing through the gap. When the wall thickness becomes thinner in the drawing process, the deviation of vessel wall thickness is eliminated, the smoothness of vessel surface is increased, and the precision and strength are improved.
(6) Reverse drawing process
It is a kind of re stretching that the workpiece processed by drawing in the previous process is reverse stretched. The reverse drawing method can increase the radial tensile stress, which can achieve good results in preventing wrinkling, and may also improve the tensile coefficient of re stretching.
Heju precision professional stamping production precision shrapnel, stretch pieces, antenna precision shrapnel and other precision hardware, so far for many well-known enterprises to provide excellent stamping product services.

Recommended reading