一本加勒比HEZYO高清


Contact Juhe Collection and gathering Online Message Website map Welcome to Dongguan Heju Precision Electronic Technology Co., Ltd

National Service Hotline: 135-2852-2558

 Metal stamping parts, stamping processing, stamping plant, precision stamping

30 years of experience in electronic hardware shrapnel customization Specializing in high difficulty, high precision, special-shaped non-standard shrapnel processing plant

Common failure causes and use methods of contact shrapnel

 Back to list Source: Heju hardware Browse: - Release date: June 28, 2019【 large in Small
 
Contact Shrapnel The service life of some contact shrapnel is up to 1 million times. What are the causes of contact fragment failure? Let's share it with you
The common failure conditions of contact shrapnel are as follows:
 
Overtravel: for example, press the shrapnel by hand, and the stroke is uncontrollable, which may lead to overtravel and damage the shrapnel.
 
Overpressure: for example, press the shrapnel by hand, the pressure is uncontrollable, and the load may exceed the normal preset pressure value of the shrapnel, which may lead to over travel and damage the shrapnel.
 
Excessive crush: use sharp objects or nails to cause shrapnel scratches.
 
The contact is too large: the contact design is unreasonable, which leads to the contact not working well with the shrapnel, which affects the normal use of the shrapnel.
 
Shrapnel Contact surface imbalance: the periphery of shrapnel is unbalanced.
 
Poor contact: install shrapnel reasonably, and pay attention to reserve space for shrapnel.
 
Resistance value: the resistance value of shrapnel is relatively fixed, such as stainless steel less than 100 ohm, nickel plating less than 1 ohm, gold plating less than 0.1 ohm.
 
When using contact shrapnel, pay attention to reasonable use, refer to the following methods:
 
Contact shrapnel contact: the size must be used with the shrapnel, or the size of the contact should be selected with the shrapnel, so as to avoid excessive crushing of the shrapnel.
 
Overpressure: all shrapnel have a preset positive pressure value. If the pressure is too high, it will cause damage to the shrapnel.
 
Overtravel: most of the shrapnel are designed according to the plane design, and the special models are designed according to the requirements of customers, and the contact point can be lower than the placing surface.
Heju Precision Electronic Technology Co., Ltd., established in 2008, is a professional ODM / OEM manufacturer specializing in the design and manufacture of stamping dies and precision stamping. Professional stamping production and processing of precision terminals, shell parts, stainless steel shrapnel and other precision hardware.

Recommended reading