一本加勒比HEZYO高清


Contact Heju Collection and gathering Online Message Website map Welcome to Dongguan Heju Precision Electronic Technology Co., Ltd

National Service Hotline: 135-2852-2558

 Metal stamping parts, stamping processing, stamping plant, precision stamping

30 years of experience in electronic hardware shrapnel customization High precision, high precision, special attack factory

What are the causes of poor quality of precision stamping parts

 Back to list Juhe source: Hardware Browse: - Release date: October 7, 2020【 large in Small
Heju Precision Electronic Technology Co., Ltd. focuses on production and processing Precision stamping parts Precision shrapnel, hardware terminals, stretching parts, lead frame and other small hardware components. It is widely used in microelectronics, electronics, electronics, electronics, electronics and electronics.
 
Sometimes Precision stamping parts The quality of the products is poor and can not meet the requirements of customers. The following factors can lead to poor workpiece quality.
 
Mold is also a key factor affecting product quality, if the mold installation is not qualified, this will also bring a lot of trouble to the staff, at the same time, the product quality can not reach the standard. At the same time, if the stamping die is used for a long time, it will also cause the wear of equipment and the loosening of parts, which will affect the precision of stamping manufacturers.
 
Material is the problem of product quality, if the raw material of the workpiece is inferior, it can not meet the demand of high precision workpiece, so the problem of substandard quality will appear in the production.
 
If the feeding process is not in accordance with the correct feeding frequency, it will cause problems if the feeding frequency is not correct.
 
Because the staff did not follow the normal working procedure, the quality of the workpiece would not meet the standard.
 
The above four points are caused by Precision stamping parts processing The causes of poor quality can be solved by checking the causes one by one.
 Precision stamping parts
This article is from the official website of Heju precision stamping http://www.hejujingmi.com/

Recommended reading